John-deere L2048 Manuel d'utilisateur télécharger pdf (Page 46)

Service Mower - 42

SERVICE MOWER

MX10529

Picture Note: 42 (3 in 1) used for photo purposes.

7. Install front draft rod (C) into mower deck bracket (D)

and secure with washer and spring locking pin (E) on the

left side of bracket as shown.

MX10520

Picture Note: 48 (3 in 1) used for photo purposes.

8. Put mower drive belt on engine drive sheave (F).

• On 48 (3 in 1): Move idler sheave (G) and tensioning

arm toward front of tractor and hold while installing belt

on drive sheave.

MX10521

• On 42 (3 in 1): Make sure belt is routed through both

belt guides (H).

9. Remove wood blocks from both sides of mower deck.

10.On machines with 42 (3 in 1): Attach PTO drive cable.

MX7681; MX10517

Picture Note: 42 (3 in 1) only.

a. Route cable under mower belt and brake rod and

attach cable spring (I) to idler sheave bracket (J).

b. Pull out on cable (K), align black end of cable with

slot in bracket (L) and release cable into slot. Secure

with spring locking pin (M).

11.Level mower.

IMPORTANT: Avoid damage! To prevent clutch

damage, make sure front draft rod is installed

correctly. Secure rod with washer and spring locking

pin on the left side of mower deck bracket.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 75 76

Pas de commentaire

John-deere L2048 Manuel d'utilisateur Page 46